Rise and Build: A DIY Bed Frame Project to Elevate Your Own Bedroom

DIY Pallet Bed frame

DIY Bed Frame or making your own bed frame is one of the fun and satisfying woodworking projects. Besides being able to save money, homemade bed frames can also add beauty and comfort to your bedroom. In this article, we’ll go over the steps to make your own bed frame easily and efficiently.

But not everyone can do it alone. This is because they are confused about where to start. Now with this article, we will guide you to start making it. We will start with what equipment you need to make a DIY bed frame.

Apart from that, it will also guide you to start with easy things, such as measuring the mattress in your bedroom. This is sometimes not thought of beforehand, so when you have finished your work, it turns out that everything is not as you imagined, the size of the bed frame is too narrow so that your mattress does not fit, or even too wide so that the remaining wood is still visible. Therefore it is important for you to pay close attention to the step-by-step.

Step by Step to Start Makin DIY Bed Frame

DIY Bed frame Design
DIY Bed frame Design via amesburydrivingschool

Building a DIY bed frame is a fun and rewarding project that can save you money and give you a sense of accomplishment. A bed frame is a great way to elevate your sleeping area and make it more comfortable and stylish. In this article, we’ll guide you through the steps of building your own DIY bed frame.


  • 2×4 lumbers
  • 2×6 lumbers
  • Wood screws
  • Wood glue
  • Sandpaper
  • Stain or paint


  • Circular saw or miter saw
  • Drills
  • Drill bits
  • Countersink bits
  • Tape measure
  • Carpenter’s square
  • clamps
  • Safety glasses


  1. Measure your mattress
    The first step is to measure your mattress to determine the size of your bed frame. Standard mattress sizes include twin, full, queen, and king.
  2. Cut the lumber
    Using a circular saw or miter saw, cut the 2×4 and 2×6 lumber to the appropriate lengths. For a queen-size bed frame, you’ll need two 2×4 boards that are 80 inches long, two that are 60 inches long, and six that are 12 inches long. You’ll also need two 2×6 boards that are 80 inches long.
  3. Assemble the frame
    Using wood screws and wood glue, assemble the frame by attaching the long 2×4 boards to the short ones to form a rectangle. Then, attach the six 12-inch boards evenly spaced along the sides of the rectangle. Finally, attach the 2×6 boards to the center of the frame using wood screws and wood glue.
  4. Sand and finish the frame
    Using sandpaper, smooth out any rough edges on the frame. Then, apply a stain or paint of your choice to finish the frame. Allow the finish to dry completely before moving on to the next step.
  5. Attach the slats
    Using wood screws, attach the slats to the frame, evenly spaced and parallel to each other. For a queen-size bed frame, you’ll need about 14 slats that are 60 inches long.
  6. Place the mattress on the frame
    Finally, place your mattress on the frame, and you’re ready to go!

In conclusion, building your own DIY bed frame can be a fun and rewarding project that can save you money and give you a great sense of accomplishment. With a few simple tools and some basic woodworking skills, you can create a stylish and comfortable bed frame that you’ll enjoy for years to come.

Leave a Reply

Your email address will not be published. Required fields are marked *