Building DIY Laying Boxes for Chickens: Tips and How To

DIY Laying boxes Cute chicken coops

The laying box is an important component of every chicken coop. You can build DIY laying boxes for chickens yourself. How to make it is not difficult, it only requires a few tools that are easy for you to get. And also some materials that are also not difficult to get.

Table of Contents

The laying box provides a comfortable and safe place for the hens to lay their eggs and helps prevent the eggs from getting damaged or soiled.

Here are some tips for setting up a laying box for your hens:

  1. Size
    The ideal size for a drop box is about 12x12x12 inches. It is large enough to comfortably accommodate most chickens, but not so large that it is tempting for them to sleep in the box rather than the coop.
  2. Location
    The laying box should be placed in a quiet, secluded area of the enclosure. This will give your hens a sense of privacy and security while they are laying their eggs.
  3. Building Materials
    Boxes should be lined with a soft, absorbent material such as straw, wood shavings, or dry leaves. This will provide a comfortable surface for your hens to lay eggs on and help keep the eggs clean.
  4. Accessibility
    The laying box should be easily accessible for you and your chickens. Make sure the box is at a comfortable height for your hens to get in and out of, and that you can easily reach inside to collect the eggs.
  5. Number of Boxes
    The number of laying boxes you need will depend on the size of your flock. A good rule of thumb is to provide one laying box for every four to six hens. This will ensure that all of your chickens have access to the box when they need it.
  6. Maintenance
    The laying box should be cleaned regularly to prevent dirt and bacteria buildup. Throw away dirty bedding and replace it with new material as needed. You should also inspect the box for any signs of damage, such as cracks or holes, and have it repaired immediately.

Building DIY laying boxes for chickens is a fun and easy project that can be done with simple materials.

Here are the steps to build your own laying boxes for your feathered friends:


  • Wood boards (1×12 inches)
  • Nails or screws
  • Saw
  • Hammer or drill
  • Measuring tape
  • Paint or stain (optional)


  1. Measure the dimensions of your chicken coop and decide how many laying boxes you want to build. Each box should be about 12x12x12 inches.
  2. Cut the wood boards to the desired size using a saw. You will need four pieces for each box: two sides, a bottom, and a front.
  3. Assemble the box by nailing or screwing the sides and bottom together. Make sure the joints are sturdy and secure.
  4. Attach the front piece to the box using hinges so that it can be easily opened and closed for egg collection. You can also add a latch to keep the box closed when not in use.
  5. If desired, paint or stain the boxes to protect the wood and add some color to your coop.
  6. Place some nesting material, such as straw or wood shavings, inside each box to make it cozy for your chickens.
  7. Install the boxes inside your coop in a location that is accessible to your chickens but protected from predators.
DIY Chicken Laying Boxes
DIY Chicken Laying Boxes
DIY Chicken Nesting Box
DIY Chicken Nesting Box
DIY Laying Boxes for Chickens
DIY Laying Boxes for Chickens
Homemade Chicken Nest with Ramp
Homemade Chicken Nest with Ramp
DIY Laying boxes Cute chicken coops
DIY Laying boxes Cute chicken coops

By following these tips, you can set up a comfortable and safe DIY laying box for your chickens, which will help keep your eggs clean and hens happy, and healthy. Congratulations, you have now built your own laying boxes for your chickens!

Leave a Reply

Your email address will not be published. Required fields are marked *