Backyard Oasis on a Budget: DIY Your Own Stock Tank Pool

Stock Tank Pool in Backyard

A stock tank pool is a pool that is made from a metal stock tank. Stock tanks are typically used for holding water or other liquids on a farm. However, they can also be used for swimming pools. Stock tank pools are becoming increasingly popular, as they are a cheaper and more eco-friendly alternative to traditional swimming pools.

There are many benefits to using a stock tank pool. They are easy to set up and take down, and they are very affordable. They are also more eco-friendly than traditional swimming pools, as they use less water.

If you are considering installing a pool in your home, then you should definitely consider a stock tank pool. Keep reading to learn more about the benefits of stock tank pools!

How Starting to Build Stock Tank Pool in Your Backyard

Backyard Stock Tank Pool
Backyard Stock Tank Pool via tipsandcrafts

Stock tank pools have become increasingly popular in recent years, especially among those who want a budget-friendly and low-maintenance way to enjoy the benefits of a backyard pool. These small, round, or oval-shaped pools are made from galvanized metal and are easy to install, making them a great option for those who don’t want to commit to a permanent, in-ground pool. In this article, we’ll guide you through the steps of creating your own stock tank pool.


  • Stock tank (can be purchased at farm supply stores or online)
  • Water pump
  • PVC pipe and fittings
  • Hose
  • Sandpaper
  • Paint or sealant (optional)
  • Decorative rocks or plants (optional)


  • Drill
  • Hole saw attachment
  • Pipe cutter or hacksaw
  • Wrench


  1. Choose the location The first step is to choose the location for your stock tank pool. Make sure it is a flat and level area, and check for any underground utility lines before digging.
  2. Prepare the site Clear the area of any rocks or debris and lay a layer of sand or gravel to create a level base for the stock tank.
  3. Install the water pump Using a drill and hole saw attachment, cut a hole in the side of the stock tank near the top. Insert the water pump through the hole and secure it in place with PVC pipe and fittings. Connect the hose to the pump and extend it to a nearby electrical outlet.
  4. Fill the tank Fill the tank with water and turn on the pump to circulate the water.
  5. Optional: Paint or seal the tank If you want to give your stock tank pool a unique look, you can paint or seal the tank with a protective coating. Be sure to use a paint or sealant that is safe for use with water.
  6. Add decorative features To add a decorative touch to your stock tank pool, you can add rocks, plants, or other decorative features around the outside of the pool.

In conclusion, a stock tank pool is a great option for those who want a backyard pool without the expense and maintenance of a traditional in-ground pool. With a little bit of effort, you can create your own stock tank pool that will provide hours of fun and relaxation for you and your family.

Leave a Reply

Your email address will not be published. Required fields are marked *